পণ্য

বাড়ি > পণ্য > মাটির ইট তৈরির মেশিন > Fully Automatic Clay Brick Production Line with Tunnel Kiln Firing System and PLC Automation

বিভাগসমূহ

ইট প্রকল্পের নকশা প্রদর্শনী

(15)

যোগাযোগ

যোগাযোগ: Mr. Brandon Lan

টেলিফোন: 86--18182622677

ফ্যাক্স: 86-029-89183545

এখনই যোগাযোগ করুন

আমাদের মেইল করুন

Fully Automatic Clay Brick Production Line with Tunnel Kiln Firing System and PLC Automation

Name: Fully Automatic Clay Brick Production Line with Tunnel Kiln Firing System and PLC Automation
Brand: Xi'an Brictec Engineering Co., Ltd.
SKU: কেটিবি
Price: 5000000 USD
Availability: InStock

পণ্যের বিবরণ

উৎপত্তি স্থল: চীন

পরিচিতিমুলক নাম: Brictec

সাক্ষ্যদান: CE; ISO

মডেল নম্বার: কেটিবি

পেমেন্ট ও শিপিংয়ের শর্তাবলী

ন্যূনতম চাহিদার পরিমাণ: 1 সেট

মূল্য: US$ 5000000

ডেলিভারি সময়: 60 দিন

পরিশোধের শর্ত: এল/সি, ডি/এ, ডি/পি, টি/টি, ওয়েস্টার্ন ইউনিয়ন, মানিগ্রাম

সেরা দাম পান

পণ্যের বিবরণ

পণ্যের বর্ণনা

বিশেষভাবে তুলে ধরা: 
                                                Fully Automatic Clay Brick Production Line, Tunnel Kiln Firing System Clay Brick Making Machine, PLC Automation Clay Brick Kiln
                              

Fully Automatic Clay Brick Production Line with Tunnel Kiln Firing System and PLC Automation

Clay Brick Kiln Fully Automatic Clay Brick Production Line

2025 Brictec Iraq Clay Brick KTB Project

Our product pricing is customized according to your production capacity requirements and detailed project drawings, ensuring the most cost-effective solution for your brick plant.

Construction Process of Clay Brick Plant

Project Overview

The construction of a clay sintered brick plant is a systematic project consisting of several key sections: raw material yard, forming workshop, drying system, tunnel kiln firing system, finished brick packaging line, and supporting utilities.

The entire process follows the principles of scientific planning, phased construction, quality first, and safety control, ensuring stable operation after commissioning.

General Construction Workflow

Survey and Design Phase

Geological investigation and foundation bearing tests
Plant layout and functional zoning design
Determination of tunnel kiln orientation and foundation layout
Completion of civil, structural, and equipment design drawings

Civil Foundation Construction

Site leveling and road hardening
Excavation and concrete pouring
Installation of embedded parts and kiln foundation
Application of moisture-proof layers

Equipment Installation and Commissioning

Installation of raw material line, brick forming units, and stacking robots
Installation of drying ducts, fans, and hot air systems
Tunnel kiln masonry and burner system setup
PLC automation and sensor calibration
Unloading and packaging systems commissioning

Trial Production and Validation

No-load testing → Kiln drying → Pilot firing
Optimization of firing curves and temperature zones
Verification of water absorption, compressive strength, and surface quality

Tunnel Kiln Construction Process (Key Section)

The tunnel kiln is the core unit of brick firing, and its construction quality directly determines production efficiency and product performance.

Kiln Foundation

Bearing capacity ≥ 180kPa; flat and crack-free concrete base (≥ C30 grade)
Reinforced with a waterproof insulation layer
Track elevation error ≤ 3mm

Kiln Body Masonry

Multi-layer composite structure using high-alumina bricks and insulation materials
Vault-type roof with steel frame support
Floor bricks made of wear-resistant materials with smooth leveling
Mortar joints ≤ 3mm, bonded with high-temperature adhesives

Combustion & Ventilation System

Equipped with burners, air ducts, and exhaust fans
Controlled via PLC with temperature zone sensors
Sealed ducting prevents backflow and gas leakage

Kiln Car and Track System

Kiln cars made of heat-resistant steel
Flatness tolerance ≤ 2mm
Tracks aligned precisely for stable operation

Kiln Drying and Trial Operation

Temperature rise ≤ 20°C/h in stages
Full drying cycle: 10-15 days
Continuous monitoring of stress and temperature distribution
Trial firing follows successful drying

Quality Control Key Points

Control Item	Requirement	Inspection Standard
Refractory Material	Al₂O₃ ≥ 55%	Sampling & certification
Masonry Accuracy	Joint 2-3mm, vault deviation ≤5mm	Field measurement
Track Alignment	Level error ≤3mm, alignment ≤2mm	Laser inspection
Thermal Insulation	Outer wall temp ≤65°C	Thermal imaging
Combustion System	No gas leakage, uniform flame	On-site commissioning
Roof Stability	No deformation or displacement	Dynamic monitoring

Acceptance and Optimization

Full inspection of kiln geometry, sealing, and control systems
Submission of construction and inspection records
Monitoring of energy consumption and product quality during test run
Continuous optimization of firing parameters for best efficiency

Tags:

মাটির ইট তৈরির মেশিন

ভ্যাকুয়াম ইট এক্সট্রুডার

ইটের টানেল ভাটা

সিল ইট উৎপাদন লাইন

ইট তৈরির প্রক্রিয়া

ক্লে বক্স ফিডার

রোল পেষণকারী

ইট উপাদান মিশুক

অন্যান্য

ইট কাটার মেশিন

ইট লোডিং এবং আনলোডিং সিস্টেম

ইট ফায়ারিং সিস্টেম

ইট শুকানোর মেশিন

ইট প্যাকিং মেশিন

রোবট প্যালেটাইজিং মেশিন

আলংকারিক ইট টাইল

কাঁচামাল বিশ্লেষণ

ইট প্রকল্পের নকশা প্রদর্শনী

Fully Automatic Clay Brick Production Line with Tunnel Kiln Firing System and PLC Automation